An electrically operated End-Of-line system consists of a central pumping unit with a flow –direction valve, two main Supply Lines and suitably placed “AFMC” Pumping Unit. The central unit is high pressure plunger type reciprocating pump driven by an electric motor. The suitably placed metering manifolds has a built in and Worm and Worm-wheel type reduction gear to obtain correct cam shaft speed. The reversing Flow direction Valve directs the lubricant into one each of the main lines in turn , while the other line is in relief. After the pressurised line injects the lubricant to the bearings through the Metering Manifolds, pressure increases in the line to a preset valve, and operates a Pressure Control Valve located at the end of the longest branch (before the last Metering Manifold) or alternatively at the central pumping station. Operation of the Pressure Control Valve stops the Electrical Motor and activates the reversing Flow direction Valve, so that the next cycle the lubricant many be delivered through the other main line. In this range our models include Duotrol 60/120/133/150/300/500 C.C. min.

A relay logic Control Panel is supplied together with the Pump to co-ordinate the entire electrical operation and also the resumption of successive cycles at desired intervals. The Control Panel is also designed to give Audio-Visual warning signals, in case, due to any reason, a lubricating cycle is not found to be completed within a preset stipulated period. Restarting successive cycles of lubrication may be done in any of the following ways:-

• (i) Automatically at regular intervals by help of an electrical Time Clock.
• (ii) Electrically inter-locked with the parent machine to make a cycle of lubrication, whenever a preselected movement of the parent machine takes place.
• (iii) Whenever desired, by help of an over-riding Push Button.

AFMC manufactures a wide range of metering manifolds (Dose feeders) which include product equivalents of various world renowned manufacturers. We manufacture product equivalents of Lincoln , Delimon, Daikin, IHI, Samsung, Farval USA, Farval, UK etc. All the Models we manufacture vary in dimensions, inlet & outlet threads and discharge which make them equivalent to their counterparts and also provides a wide variety of combinations which suit the client’s exact requirements.

AFMC" metering manifolds are used as positive metering devices in Two-Line lubrication systems.The metered injection of lubricant at high pressure is achieved by means of ingenuous valvepiston combination.Discharge from each outlet can be individually adjusted by means of screws located at the top of the indicator housing.Indicator stems attached to pistons give positive visual indication of operation .Special seals prevent leakage past indicator stems.